Quick-Release Olympic Barbell Collars 50 mm (Pair)

14,95 € incl. VAT

  • Fits bars with 50 mm sleeves – Olympic barbells, EZ bars, trap bars and similar equipment
  • Lever closure: no spinning, no tools
  • Hold the plates in place so they do not creep towards the end of the sleeve
  • Black hinged plastic body held together by Phillips screws
  • Sold as a pair – one collar for each end of the bar

In stock — ships next business day

  • Delivery in 1–3 days
  • Shipping 4,90 € · free over 80 € (up to 5 kg)
  • 14-day returns
  • Slovenian support
SKU
PS-WL1007
Manufacturer
Nantong Pilot Sports · safety information

Description

These quick-release Olympic barbell collars keep your plates in place while you lift. Slide a collar onto the bar sleeve, push it against the last plate and close the lever – no spinning, no tools. They suit home gyms and functional training, where the load on the bar changes often.

Features

  • 50 mm inner diameter – fits Olympic barbells and other equipment with 50 mm sleeves, including the EZ bar and trap bar in our shop.
  • Lever closure – open or close each collar in a single movement.
  • Ribbed lever – with a small latch on its upper edge.
  • Hinged plastic body – hexagonal with rounded corners, held together by Phillips screws.
  • Sold as a pair – one collar for each end of the bar.

Why use collars?

Without collars, plates can creep towards the end of the sleeve during an uneven lift, when you rack the bar or when you set it down on the floor. The bar tips, the plates rattle and, at worst, slide off. A collar clamps the plates against the bar’s inner collar, which reduces that risk and makes your sessions quieter.

Which exercises?

Use them for any loaded barbell exercise, for example:

  • back squats, front squats and deadlifts,
  • bench press, overhead press and barbell rows,
  • hip thrusts and barbell lunges,
  • EZ bar curls and skull crushers, trap bar deadlifts and shrugs,
  • Olympic lifts and barbell complexes in functional training, where you change the weight between sets.

These are training collars. Official weightlifting and powerlifting competitions use dedicated competition collars.

Fitting and use

  1. Load the plates onto the sleeve.
  2. Open the lever and slide the collar onto the sleeve.
  3. Push it firmly against the last plate.
  4. Close the lever fully, then repeat on the other side.
  5. To remove a collar, open the lever and pull it off the bar.

Before every set, take a second to check that both collars are closed.

Care

Wipe the collars with a dry or slightly damp cloth and avoid solvents or harsh cleaners. Check now and then that the screws on the body are tight. Store them somewhere dry and away from heat sources – next to your plates on the rack works well.

What’s in the box

2 collars (one pair) for bars with 50 mm sleeves.

Frequently asked questions

Will these collars fit my barbell?

They fit bars with 50 mm sleeves, which is the standard for Olympic barbells; in our shop, for example, the 2.2 m Olympic bar, the EZ bar and the trap bar. They are not suitable for standard bars with 25–30 mm sleeves.

How many collars are in the pack?

You get 2 collars – one for each end of the bar. One pack is enough for one barbell.

How do I put the collars on and take them off?

With the lever open, slide the collar onto the sleeve, push it against the last plate and close the lever. To remove it, open the lever and pull it off – no tools required.

What are the collars made of?

The body and lever are black plastic, and the body is held together by Phillips screws. These are training collars, not competition collars.

Why do I need barbell collars at all?

Without collars, plates can shift towards the end of the sleeve during a lift, tipping the bar or sliding off. Collars hold the plates against the bar's inner collar.

How are the collars delivered?

We ship with DPD within Slovenia; delivery takes 1–3 working days, and orders placed by 12:00 on a working day are dispatched the same day. Orders over €80 weighing up to 5 kg in total ship free – you can add the collars to other light items; otherwise the cart shows the delivery cost.

Details

Inner diameter 50 mm
Compatible with Olympic barbells and equipment with 50 mm sleeves
Quantity 2 pieces (one pair)
Closure lever with ribbed grip, tool-free
Body material plastic
Colour black
Body design hinged, held together by Phillips screws
Shape hexagonal with rounded corners
Model code WL1007
Shipping weight 0.68 kg

Manufacturer and safety

Manufacturer
Nantong Pilot Sports
No. 885 Taiping North Road, Nantong City, Jiangsu, China
Importer and EU responsible person
Softbase IS informacijski sistemi in trgovinska dejavnost d.o.o.
Gmajna 22A, 2317 Oplotnica, Slovenia
info@treniraj.si
Product identification
SKU PS-WL1007 · model WL1007

Safety information

  • Before every set, take a second to check that both collars are closed.
  • The collars fit bars with 50 mm sleeves; they are not suitable for bars with 25–30 mm sleeves.

Information under Regulation (EU) 2023/988 on general product safety.